In this report we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and tricks which you can use.

For those who have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the home, you will need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it’s really very simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape out of the cardboard, so you will have to cut around the edge of the mask so that you get something that resembles a cone. The most important thing here is to be realistic with what kind of paper plate that you’re using.

Then you will need to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can ensure that nothing will leak when you place the mask on. Be sure the edges are cut so the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask , so that you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.

Don’t fret too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it will leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wash away any excess paint after you’re done, so you don’t wind up with smudges or smears on your dog.

Then it is time to glue the mask onto your dog’s head. First you need to make sure that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you may dog gas mask begin to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the base of the mask and fold it over. Be sure that it’s quite strong and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged securely onto the surface of your dog. Don’t make the folds too big or else it might look messy. Once you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask onto the dog. Make certain that the ears are flat and make sure that it is not too short or long as this can cause some problems with the mask slipping off the dog’s face.

If you’re using a dog mask because your pet security, you will need to do some sanding to be sure that it is safe on your dog. You can do this by sanding off any excess paper that may have been eliminated from your mask.

BÌNH LUẬN

Please enter your comment!
Please enter your name here